The DHP480RMJ is a Makita cordless combi drill with a brushless motor, and it is both compact and durable.
Packaged with two Makita4.0AhLithium-ion batteries, you will find this 18v lithium-ion cordless hammer drill to be a powerful solution for a range of professional drilling and screwdriving tasks.
Watch the Video below to see the DHP480:
Why should I buy this Makita 18v combi drill?
Brushless DC motor
Dust and drip-proof design
Battery fuel gauge
XPT: eXtreme Protection Technology
Compact design and rubberized soft grip
Variable speed control: trigger operation
LED job light
Single sleeve keyless chuck
What are the advantages of a brushless combi drill?
Brushless motors enable greater productivity, as they are up to 50% more efficient than brushed motors. When you use a cordless drill with a brushless motor, an 18v Lithium-ion battery will last almost twice as long!
The brushes in brushed motors apply friction, but with the reduced friction of the motor in this 18v brushless impact drill you can get higher levels of torque for an equivalent weight. With more torque at your disposal you use less power during the course of a day, which results in a more efficient tool, reduced service costs, and a longer overall lifetime.
Can this Makita cordless impact drill be used for trade tasks?
The Makita DHP 480 18v Li-ion combi drill is robust thanks to the eXtreme Protection Technology, featuring a dust- and drip-proof design that will always provide you with reliable operation, even in bad weather conditions.
Comfort and Ease-of-Use
The single-sleeve keyless chuck enables you to change bits quickly and easily using just one hand, and the ergonomic design of this machine means that you can use it in comfort, even for long periods of time. This cordless impact drill also features a battery fuel gauge, which allows you to keep an eye on the remaining capacity at the push of a button to make sure you're never caught without power.
Overall, it is clear that the Makita DPH 480 RMJ 18v hammer drill is one of the best combi drills on the market that is capable of performing the toughest trade tasks.
Capacity in Steel: 13mm Wood: 38mm Masonry:13 mm
Chuck Capacity: 13 mm
Blows per Minute High: 0-22,500 Low: 0-6000 ipm
Maximum Output: 370 w
No Load Speed High: 0-1500 Low: 0-400 rpm
Torque Settings: 16 + drill
Max Fastening Torque: 36/54 Nm
Vibration: K factor: 1.5 m/sec² Impact drilling in concrete: 7 m/sec² Drilling in metal: 2.5 m/sec²