Trend 46/95X1/4TC 1/4in Pro. Template Profile Cutter
This Trend 46/95 router cutter (full code: 46/95X1/4TC) is a 1/4 inch profiler with shank mounted bearing guides. It is for profiling and rebating with routers mounted above or below a table when following a template - not for plunge cutting/grooving.
- Shank diameter: 1/2 inch
- Cutter diameter: 12.7 mm
- Cutter length: 25.4 mm
- Bearing: 12.7 mm
- Angle: 90 degrees
- A 3mm maximum overlap should be left before trimming