• £ 0.00
Trend Combi 1002 Worktop Jig

Trend Combi 1002 Worktop Jig (For Worktops <1000mm Wide)

Product Code: TR-COMBI1002
£263.80 Ex Vat
£ 316.56 Inc Vat
Need Help?

Need help? Call 0141 883 4794

Free delivery on this product

Free Delivery on this product

3-4 Days Dispatch

3-4 Days dispatch

Trend Combi 1002 Worktop Jig

The Trend Combi 1002 worktop jig is a single male and female template in 16mm solid laminate, suitable for worktops up to 1000mm wide. It now features a cable tidy insert, circular hinge cut apertures, intergral template slots for rounding and mitring of peninsular worktop corners for cable tidy inserts, and a circular concealed hinge aperture and 3/4 inch BSP holes for mixer taps.

  • Facility to join boards from 450mm to 1000mm wide
  • Facility to cut 22.5 degree mitre corners for hob units
  • Three alloy location bushes and a width-setting stop
  • Colour coded pin location for quick and easy use
  • Four bolt recess slots for connection bolts, to allow thre bolts in 600mm wide worktop
  • Cuts out of square joints (max. 3 degrees)
  • Guide bush and cutter checker
  • Two 25mm holes for bridge (bed) mixer tap at 180mm centres.

Jig requires:

  • A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts
  • A template guide bush with 30mm outside diameter
  • A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length
  • Two 100mm (4 inch) throat clamps.

Technical Spec.

  • Length 1200 mm
  • Height 376 mm
  • Width 16 mm
  • Weight 9.6kg
  • End cut 45 degrees
  • Corner Mitre Joint 22.5 degrees
  • Circular Hinge diameter 35 mm

Supplied With

  • 1 x Length Stop
  • 3 x Location Bushes