The Trend Unibase is a universale sub-base that enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. It suits 1/4in, 8mm, 12mm and 1/2in collet sizes, and the line-up pin is used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.
Instructions for fitting: The line-up pin fits into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.
- 2 x Line-up pins
- 1 x Guide bush
- 1 x Fixing screw pack