• £ 0.00
Panasonic EY75A7 Dual Voltage Impact Driver (Naked)

Panasonic EY75A7X 18V DualV Brushless Impact Driver Bare Unit (Body Only)

Product Code: PS-EY75A7X32
£129.00 Ex Vat
£ 154.80 Inc Vat

Great Low Price!

Need Help?

Need help? Call 0141 883 4794

in stock

In Stock

Free delivery on this product

Free Delivery on this product

24h Dispatch

Next Day Delivery Order before 3pm

Panasonic EY75A7 Dual Voltage Impact Driver (Naked)

The Panasonic EY75A7 impact driver is a dual voltage model, which means that it is compatible with both 18v and 14.4v Panasonic batteries. This particular version is the body only packaged without batteries or charger, allowing you to add it to your pre-existing kit.

Improvements made over the previous model include a new “self-drilling screw mode”, improved durability, improved brushless motor, and a stylish new “carbon black” design.

What are the key features of this 18v Panasonic impact driver?

  • Tough Tool IP56 dust and splash protection means that you can use this tool in any conditions.
  • Self-drilling screw mode: the tool starts at the highest speed to cut the hole, then transfers to “hard” (high-impact) mode to cut the thread. After that the load is reduced, so the tool switches to “soft” (soft-impact) mode to limit potential thread stripping.
  • New brushless motor is more powerful, more compact, and more well-balanced. It will provide you with up to 200% more cycles, and has a thicker motor shaft to provide greater strength for heavy-duty use.
  • Improved durability: see below for details.
  • Improved drivetrain design reduces “centre run-out”, improves accuracy, reduces damage to the screw, and allows smoother driving with lower noise and vibration levels even during heavy usage.
  • Hard, medium, and soft modes are ideal for fastening long bits and bolts, furniture, and plasterboard respectively.
  • 3-speed provides even more application flexibility.
  • Electric brake improves user and tool protection.
  • Usability features include improved anti-slip grip pattern, belt hook, LED worklight, and tapered bit holder that enable quick and easy bit changes.
  • Superb battery technology: visit Panasonic Battery Technology page for details

What improvements have been made to durability?

  • Housing: metal plates have been added where the battery locks into the tool. This helps to prevent wear and tear caused by abrasion and vibration during heavy use.
  • Anvil: the redesign and improvement of anvil materials has increased the durability of the impact parts, which ensures a longer service life and increased overall performance.
  • Switch: the hybrid switch uses rigid metal parts in the trigger for 200% more durability compared to the previous switch model.
  • Motor: thicker motor shaft (φ5mm) ensures greater strength, for heavy-duty use.
  • Elastomer Bumper: increased amounts of rubber and resin coating on the bottom of the tool which help prevent damage if dropped from elevated areas.

What are the advantages of a Dual Voltage Impact Driver?

The cordless tools in this range have a sensor in their body that detects the battery voltage, and then changes the current and voltage flow to enable the best performance.

This allows you to customise your Panasonic impact driver to suit the job: use 18.0v 5.0Ah batteries for super-high power and a long runtime, or use 14.4v batteries with a smaller power reserve for a lighter tool that’s easier and more comfortable to use in awkward positions.

Panasonic Tool Case

Get the Case too!

Compatible with this
EY75A7 impact driver
Only £15!
Panasonic Tool Case

Panasonic Cordless Tools

Panasonic DEALS

See our complete
range of cordless
Panasonic Tools




Technical Spec.

  • Voltage: 14.4v and 18.0v
  • 5.0Ah battery capacity in M12 high-tensile bolt: more than 30.000 pcs

  • Max. torque (low): 26Nm
    Max. torque (medium): 120Nm
    Max. torque (high): 160Nm

  • No-load speed (low): 0-950 rpm
    No-load speed (medium): 0-1.450 rpm
    No-load speed (high): 0-2.500 rpm
  • Impacts (low): 0-1.900 ipm
    Impacts (medium): 0-2.900 ipm
    Impacts (high): 0-3.100 ipm
  • Max standard tensil bolt t=10mm: M6 - M16
    Max high tensil bolt t=10mm: M6 - M12
  • Size (W x L x B): 66 x 118 x 242mm
  • Weight (incl. battery): 1.7kg

Supplied with

  • Naked tool: batteries, charger and case not included